order cialis 20mg online

Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Specifications
   System of anti-blocking of brakes (ABS) and antiprobuksovochny system (TCS) - the general information and codes of malfunctions
   Pumping of brake system
   Check of a condition and replacement of brake lines and hoses
   Replacement of blocks of disk brake mechanisms of forward wheels
   Replacement of blocks of disk brake mechanisms of back wheels
   Replacement of boots of drum-type brake mechanisms of back wheels
   Condition check, removal and installation of a brake disk
   Removal, check of a condition and installation of a brake drum
   Removal, regenerative repair and installation of supports of disk brake mechanisms of forward wheels
   Removal, regenerative repair and installation of supports of disk brake mechanisms of back wheels
   Removal, service and installation of wheel cylinders of drum-type brake mechanisms of back wheels
   Removal and installation of the main brake cylinder
   Removal and installation of a pedal of a foot brake
   Check of serviceability of functioning/tightness, removal and installation of assembly of the vacuum amplifier of brakes
   Removal, check of serviceability of functioning and installation of the return valve of the vacuum amplifier of brakes
   Removal and installation of the vacuum pump of the servo-driver of the brake amplifier (diesel models)
   Check of serviceability of functioning of the vacuum pump of the servo-driver of the brake amplifier (diesel models)
   Adjustment of a drive of the parking brake
   Removal and installation of the lever of the parking brake
   Removal and installation of cables of a drive of the parking brake
   Removal, installation and adjustment of the sensor switch of stoplights
   Removal and installation of the sensor switch of a control lamp of raising of the parking brake
   Removal and installation of the ABS and TCS components
   Removal, installation and adjustment of the valve regulator of pressure in hydraulic contours of brake mechanisms of back wheels
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

http://flashlottos24.ru/


Adjustment of a drive of the parking brake

Adjustment is made according to the Schedule of routine maintenance (see. Head Routine maintenance), and also each time after replacement or removal / installation of back blocks / boots or disks / drums.


Adjusting nut

1 — the Lever of the parking brake
2 — the Protective cover

3 — the Adjusting nut


 PERFORMANCE ORDER

  1. Prop up forward wheels protivootkatny boots, поддомкратьте a back of the car and establish it on props.
  2. Uncover the central console, liberate from the console a cover of the lever of the parking brake and lift it for the purpose of ensuring access to an adjusting nut ahead of the lever (see an illustration the Adjusting nut). The adjusting nut is ahead of the lever of the parking brake, - previously lift a protective cover.
  3. Completely release the lever and slightly turn out a nut, for receiving a weak point of a cable.
  4. Not less than five times squeeze out a pedal of a foot brake. On models with drum-type brake mechanisms of back wheels ask thus the assistant to define aurally operation of the mechanism of adjustment of an adjusting gap of back boots, - continue to squeeze out a pedal before the termination of clicks of a regulator.
  5. Completely cock, then again release the lever.
  6. Cock the lever on three clicks, then tighten an adjusting nut till the beginning of a prikhvatyvaniye of back wheels, - there should be a possibility of a provorachivaniye of wheels manually. Both back wheels should be turned with identical resistance, otherwise check freedom of a course of driving cables in the covers.
  7. Completely cock the lever and check reliability of blocking of both wheels. Completely release the lever, - both wheels should start to rotate freely.
  8. Plant a cover on the central console and establish the central cover of the console.
  9. Cock the parking brake and lower the car on the earth.