Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Specifications
   System of anti-blocking of brakes (ABS) and antiprobuksovochny system (TCS) - the general information and codes of malfunctions
   Pumping of brake system
   Check of a condition and replacement of brake lines and hoses
   Replacement of blocks of disk brake mechanisms of forward wheels
   Replacement of blocks of disk brake mechanisms of back wheels
   Replacement of boots of drum-type brake mechanisms of back wheels
   Condition check, removal and installation of a brake disk
   Removal, check of a condition and installation of a brake drum
   Removal, regenerative repair and installation of supports of disk brake mechanisms of forward wheels
   Removal, regenerative repair and installation of supports of disk brake mechanisms of back wheels
   Removal, service and installation of wheel cylinders of drum-type brake mechanisms of back wheels
   Removal and installation of the main brake cylinder
   Removal and installation of a pedal of a foot brake
   Check of serviceability of functioning/tightness, removal and installation of assembly of the vacuum amplifier of brakes
   Removal, check of serviceability of functioning and installation of the return valve of the vacuum amplifier of brakes
   Removal and installation of the vacuum pump of the servo-driver of the brake amplifier (diesel models)
   Check of serviceability of functioning of the vacuum pump of the servo-driver of the brake amplifier (diesel models)
   Adjustment of a drive of the parking brake
   Removal and installation of the lever of the parking brake
   Removal and installation of cables of a drive of the parking brake
   Removal, installation and adjustment of the sensor switch of stoplights
   Removal and installation of the sensor switch of a control lamp of raising of the parking brake
   Removal and installation of the ABS and TCS components
   Removal, installation and adjustment of the valve regulator of pressure in hydraulic contours of brake mechanisms of back wheels
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Removal and installation of the lever of the parking brake

 PERFORMANCE ORDER

  1. Uncover the central console and a protective cover of the lever.
  2. Completely turn out an adjusting nut.
  3. Remove the central console (see. Head Body).
  4. Remove the sensor switch of a control lamp of raising of the parking brake (see. Removal, installation and adjustment of the sensor switch of stoplights).
  1. Give nuts of fastening of the lever.

    1 — the Adjusting nut
    2 — Fixing nuts

  1. Release plastic clamps in the basis of lever assembly and remove the last.
  2. Take the plate of the basis established ahead of a driving cable and remove laying.
  3. Installation is made upside-down. In summary make adjustment of a drive of the parking brake (see. Adjustment of a drive of the parking brake).