Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of a decorative front grille
   Removal, installation and cowl adjustment
   Removal and installation of loops of a cowl
   Removal and installation of components of the lock of a cowl
   Removal and installation of a cable of a drive of an otpuskaniye of a latch of the lock of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of the internal handle of a door
   Removal and installation of the external handle of a door
   Removal and installation of door locks
   Removal and installation of cylinders of locks of forward doors
   Removal and installation of the drummer of the door lock
   Removal and installation of door glasses
   Removal and installation of a regulator of a window regulator
   Removal and installation of a cover of a luggage compartment (Sedan model)
   Removal and installation of loops of a cover of a luggage compartment
   Removal and installation of components of a cover of a luggage compartment
   Removal and installation of a door of a back (Hatchback models and Versatile person)
   Removal and installation of loops of a door of a back
   Removal and installation of components of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of window regulators (at the corresponding complete set of the car)
   Removal and installation of door rear-view mirrors
   Removal and installation of glass of a door rear-view mirror
   Removal and installation of components of the electric drive of rear-view mirrors
   Removal and installation of an internal rear-view mirror
   Removal and installation of elements of the panel of a fairing of a windscreen
   Removal and installation of glass of the top hatch
   Removal and installation of components of the top hatch
   Removal and installation of loker of protection of wheel arches - the general information
   Removal and installation of a door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of elements of furnish of a body
   Removal and installation of forward seats
   Removal and installation of back seats
   Removal and installation of modules of emergency natyazhitel of seat belts of forward seats
   Removal and installation of seat belts
   Removal and installation of the top adjustable anchor knots of seat belts
   Removal and installation of panels of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of a ware box
   Removal and dashboard installation
+ Onboard electric equipment

http://flashlottos24.ru/


Removal and installation of door locks

Forward doors

 PERFORMANCE ORDER

  1. Remove the panel of an internal upholstery of a door and isolating plastic membrane (see. Removal and installation of panels of internal furnish of salon).
  1. Lift glass, drill rivets of fastening of a directing trench to the internal panel of a door and take a trench through an opening in the panel. Through an opening at doors extend the red button and disunite the contact socket of electroconducting of the uniform lock.
  1. Through an opening at doors disconnect from the lock of draft of management, - drafts fasten plastic clamps.
  1. At back edge of a door turn out three screws of fastening of the lock to the door panel.
  1. Lower the lock down and take it from a doorframe, at the same time releasing the button of switching off of the lock and directing through an opening in the door panel.
  1. Release a clamp of fastening of a cover of a cable to the internal handle of a door and the button of switching off of the lock and disconnect cables from the lock.
  1. Installation is made upside-down. Check serviceability of functioning of the lock, simulating a drummer finger a screw-driver. If the lock badly opens the handle, make the corresponding adjustment of length of draft, by rotation of a plastic gear castor on its end.

Back doors

 PERFORMANCE ORDER

  1. Completely lower glass. Remove the panel of an internal upholstery of a door and isolating plastic membrane (see. Removal and installation of panels of internal furnish of salon).
  2. Turn out fixing screws and separate a cover of a driving cable of the button of switching off of the lock from the door panel, disconnect a cable tip from the intermediate lever.
  3. Having released a plastic clamp, disconnect draft of the handle.
  4. At back edge of a door turn out three screws of fastening of the lock to the door panel.
  5. Through an opening at doors shift the lock forward for the purpose of a possibility of a detachment of electroconducting, - extend the red button.
  1. Disconnect a lock cable from fastening and take the lock from a doorframe assembled with the handle and a driving cable of the button of its switching off, at the same time liberating the last.
  1. Disconnect a tip of fastening of a cover of a cable from the internal handle of a door and the button of switching off of the lock and disconnect cables from the lock.
  2. Installation is made upside-down. Check serviceability of functioning of the lock, simulating a drummer finger a screw-driver.