Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of a decorative front grille
   Removal, installation and cowl adjustment
   Removal and installation of loops of a cowl
   Removal and installation of components of the lock of a cowl
   Removal and installation of a cable of a drive of an otpuskaniye of a latch of the lock of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of the internal handle of a door
   Removal and installation of the external handle of a door
   Removal and installation of door locks
   Removal and installation of cylinders of locks of forward doors
   Removal and installation of the drummer of the door lock
   Removal and installation of door glasses
   Removal and installation of a regulator of a window regulator
   Removal and installation of a cover of a luggage compartment (Sedan model)
   Removal and installation of loops of a cover of a luggage compartment
   Removal and installation of components of a cover of a luggage compartment
   Removal and installation of a door of a back (Hatchback models and Versatile person)
   Removal and installation of loops of a door of a back
   Removal and installation of components of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of window regulators (at the corresponding complete set of the car)
   Removal and installation of door rear-view mirrors
   Removal and installation of glass of a door rear-view mirror
   Removal and installation of components of the electric drive of rear-view mirrors
   Removal and installation of an internal rear-view mirror
   Removal and installation of elements of the panel of a fairing of a windscreen
   Removal and installation of glass of the top hatch
   Removal and installation of components of the top hatch
   Removal and installation of loker of protection of wheel arches - the general information
   Removal and installation of a door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of elements of furnish of a body
   Removal and installation of forward seats
   Removal and installation of back seats
   Removal and installation of modules of emergency natyazhitel of seat belts of forward seats
   Removal and installation of seat belts
   Removal and installation of the top adjustable anchor knots of seat belts
   Removal and installation of panels of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of a ware box
   Removal and dashboard installation
+ Onboard electric equipment

http://flashlottos24.ru/


Removal and installation of cylinders of locks of forward doors


Details of installation of the cylinder of the lock of a forward door

1 — the Pin of a fixing spring
2 — the Case
3 — the lock Cylinder
4 — the Plug
5 — the Ball
6 — the Clamp

7 — the case Basis
8 — the Lock ring
9 — the Carriage with the lever (the version with the uniform lock)
10 — Torsionnaya a spring
11 — the Screw spring


 PERFORMANCE ORDER

  1. Remove the external handle of the lock and the basis of its case (see. Removal and installation of the external handle of a door).
  1. Insert a key into the lock and remove a lock ring (1) from an internal end face of the cylinder.
  1. Remove from an internal end face of the cylinder the carriage and the lever, - try to remember the adjusting provision of components. Also remove torsionny and screw springs (see an illustration of the Detail of installation of the cylinder of the lock of a forward door).
  2. With paint mark position of the case of the cylinder concerning a plate. By means of a drift in diameter of 2.5 mm beat out a pin of a fixing spring, - try not to damage opening edges.
  3. Remove the lock cylinder, directing plug, balls and a clamp.

The cylinder of the lock is replaced complete with a clamp.

  1. Installation is made upside-down, - do not forget расчеканить a pin of a fixing spring.