Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of a decorative front grille
   Removal, installation and cowl adjustment
   Removal and installation of loops of a cowl
   Removal and installation of components of the lock of a cowl
   Removal and installation of a cable of a drive of an otpuskaniye of a latch of the lock of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of the internal handle of a door
   Removal and installation of the external handle of a door
   Removal and installation of door locks
   Removal and installation of cylinders of locks of forward doors
   Removal and installation of the drummer of the door lock
   Removal and installation of door glasses
   Removal and installation of a regulator of a window regulator
   Removal and installation of a cover of a luggage compartment (Sedan model)
   Removal and installation of loops of a cover of a luggage compartment
   Removal and installation of components of a cover of a luggage compartment
   Removal and installation of a door of a back (Hatchback models and Versatile person)
   Removal and installation of loops of a door of a back
   Removal and installation of components of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of window regulators (at the corresponding complete set of the car)
   Removal and installation of door rear-view mirrors
   Removal and installation of glass of a door rear-view mirror
   Removal and installation of components of the electric drive of rear-view mirrors
   Removal and installation of an internal rear-view mirror
   Removal and installation of elements of the panel of a fairing of a windscreen
   Removal and installation of glass of the top hatch
   Removal and installation of components of the top hatch
   Removal and installation of loker of protection of wheel arches - the general information
   Removal and installation of a door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of elements of furnish of a body
   Removal and installation of forward seats
   Removal and installation of back seats
   Removal and installation of modules of emergency natyazhitel of seat belts of forward seats
   Removal and installation of seat belts
   Removal and installation of the top adjustable anchor knots of seat belts
   Removal and installation of panels of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of a ware box
   Removal and dashboard installation
+ Onboard electric equipment




Removal and installation of door glasses

Forward doors

 PERFORMANCE ORDER

  1. Remove the panel of an upholstery of a door and a plastic isolating membrane (see. Removal and installation of panels of internal furnish of salon).
  2. Completely lift glass. On the models equipped with lateral safety cushions disconnect a negative wire from the battery and wait at least 1 minute during which the condenser of the independent power supply should be discharged. Disconnect electroconducting, turn out fixture and remove the safety cushion sensor assembled with a basic arm.

The right sensor differs from the left - do not mix them at installation.

  1. Drill rivets of fastening of a back directing trench of a window regulator to the internal panel of a door and take a trench from a doorframe through an opening.
  1. On m hotels with electrodriving window regulators temporarily connect the switch of a regulator and connect a negative wire to the battery. On models with manual window regulators temporarily plant on the axis the driving handle of a window regulator. Establish glass so that bolts of its fastening to a regulator were visible through openings at doors. Turn out bolts.
  1. Incline glass forward, so, to liberate a window regulator roller from a back directing trench, then lift glass up and take it from a door, having taken out outside, - it is possible, in view of limitation of an aperture, it is necessary to move glass a window regulator.

    A. Scheme of fastening of glass of a forward door
    1 — Screws of fastening of glass to a regulator
    2 — the Directing trench of glass

    B. Extraction of glass of a forward door

A.

B.
  1. Installation is made upside-down. Establish new rivets of fastening of a directing trench. Bolts of fastening of glass to a regulator at the first stage should be tightened by hand, before a final tightening of bolts glass should be lifted completely, then to lower in the relevant situation.

Back doors (including the fixed window leaf)

 PERFORMANCE ORDER

  1. Remove the panel of an upholstery of a door and a plastic isolating membrane (see. Removal and installation of panels of internal furnish of salon).
  2. On models with electrodriving window regulators temporarily connect the switch of a regulator and connect a negative wire to the battery. On models with manual window regulators temporarily plant on the axis the driving handle of a window regulator. Completely lower glass.
  3. Accurately extend rubber consolidation from a back directing trench of glass, then turn out the screw of fastening of the top directing trench. By means of a TORX type key, through openings in the internal panel of a door, turn out screws of fastening of the bottom directing trench.
  1. Accurately separate trenches from motionless glass and remove them up from a door. Consolidation of motionless glass should remain in a trench.

    1 — the Loose leaf of a directing trench
    2 — the Directing trench
    3 — the Sealant
    4 — the Fixed glass

  1. Lift the fixed glass up and remove it from a door.
  1. Incline falling glass a little, liberating it from a trench of a window regulator and, having pulled up, take from a doorframe.

    Order of liberation of glass of a back door from a directing trench of a regulator of a window regulator

In view of limitation of an aperture, probably, it is necessary to remove partially consolidation and to move glass a window regulator.

  1. Installation is made upside-down.