Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of a decorative front grille
   Removal, installation and cowl adjustment
   Removal and installation of loops of a cowl
   Removal and installation of components of the lock of a cowl
   Removal and installation of a cable of a drive of an otpuskaniye of a latch of the lock of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of the internal handle of a door
   Removal and installation of the external handle of a door
   Removal and installation of door locks
   Removal and installation of cylinders of locks of forward doors
   Removal and installation of the drummer of the door lock
   Removal and installation of door glasses
   Removal and installation of a regulator of a window regulator
   Removal and installation of a cover of a luggage compartment (Sedan model)
   Removal and installation of loops of a cover of a luggage compartment
   Removal and installation of components of a cover of a luggage compartment
   Removal and installation of a door of a back (Hatchback models and Versatile person)
   Removal and installation of loops of a door of a back
   Removal and installation of components of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of window regulators (at the corresponding complete set of the car)
   Removal and installation of door rear-view mirrors
   Removal and installation of glass of a door rear-view mirror
   Removal and installation of components of the electric drive of rear-view mirrors
   Removal and installation of an internal rear-view mirror
   Removal and installation of elements of the panel of a fairing of a windscreen
   Removal and installation of glass of the top hatch
   Removal and installation of components of the top hatch
   Removal and installation of loker of protection of wheel arches - the general information
   Removal and installation of a door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of elements of furnish of a body
   Removal and installation of forward seats
   Removal and installation of back seats
   Removal and installation of modules of emergency natyazhitel of seat belts of forward seats
   Removal and installation of seat belts
   Removal and installation of the top adjustable anchor knots of seat belts
   Removal and installation of panels of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of a ware box
   Removal and dashboard installation
+ Onboard electric equipment

http://flashlottos24.ru/


Removal and installation of a door of a back (Hatchback models and Versatile person)


Details of installation of a door of a back (Hatchback models and Versatile person)

1 — Otpuskaniye of a spring clamp of the top support of an emphasis of a door
2 — Knocking-out of axial fingers of a door should be made by means of a drift of the suitable size
3 — the Drummer should enter into zamkovy assembly strictly in the middle

4 — the Rubber pillow
5, 6 — Track uniformity of distribution of gaps of landing of a door in a body aperture (gaps should make 4 ± 1 mm)

Removal

 PERFORMANCE ORDER

  1. Open a back door, remove caps, unscrew fixing screws and remove the top and bottom sections of the panel of an internal upholstery, - pay attention that the bottom section is equipped with the ledges entering into gearings with grooves in the top section.
  2. Turn out fixing screws, release clamps and remove a stoplight of the top level.
  1. From the interior of a door disconnect a wire of grounding and tie up to a plait electroconducting a wire piece. Liberate from a doorframe the rubber plug through passage and extend electroconducting outside, - a wire leave passed through an opening.
  1. Having passed a screw-driver in an opening, wring out clamps and remove a nozzle of supply of liquid of washing of back glass. Disconnect from a nozzle a hose of supply of liquid and tie up to it a piece of a wire. Extend a hose from a door, having left a wire passed in an opening.
  2. Ask the assistant to hold a door and, hooking a screw-driver, release spring clamps (1) telescopic racks (see an illustration of the Detail of installation of a door of a back (the Hatchback models and the Versatile person)). Disconnect racks from hinges and lower them on a body.
  3. Remove clamps and it is accurate, by means of a small drift beat out axial fingers of loops (2) (see an illustration of the Detail of installation of a door of a back (the Hatchback models and the Versatile person)).
  4. Remove a door from the car.

Installation

 PERFORMANCE ORDER

  1. At replacement of a door transfer on it all demountable components (rubber pillows, the lock mechanism and so forth).
  2. Installation is made as it should be, the return to an order of dismantle of components. Before installation of axial fingers of loops grease them with a greasing layer. Track, that gaps of landing of a door of a back in a body aperture (5 and 6) (see an illustration of the Detail of installation of a door of a back (the Hatchback models and the Versatile person)) were identical on all perimeter of a door, - in case of need release bolts of fastening of loops, previously having removed back section of a ceiling upholstery, and make the corresponding adjustment. When closing door the drummer (3) should enter into the lock strictly in the middle, - in case of need correct position of the drummer. In a closed position the fifth door should lean strongly on rubber pillows (4) (see an illustration of the Detail of installation of a door of a back (the Hatchback models and the Versatile person)) which situation in case of need also can be adjusted.