Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of a decorative front grille
   Removal, installation and cowl adjustment
   Removal and installation of loops of a cowl
   Removal and installation of components of the lock of a cowl
   Removal and installation of a cable of a drive of an otpuskaniye of a latch of the lock of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of the internal handle of a door
   Removal and installation of the external handle of a door
   Removal and installation of door locks
   Removal and installation of cylinders of locks of forward doors
   Removal and installation of the drummer of the door lock
   Removal and installation of door glasses
   Removal and installation of a regulator of a window regulator
   Removal and installation of a cover of a luggage compartment (Sedan model)
   Removal and installation of loops of a cover of a luggage compartment
   Removal and installation of components of a cover of a luggage compartment
   Removal and installation of a door of a back (Hatchback models and Versatile person)
   Removal and installation of loops of a door of a back
   Removal and installation of components of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of window regulators (at the corresponding complete set of the car)
   Removal and installation of door rear-view mirrors
   Removal and installation of glass of a door rear-view mirror
   Removal and installation of components of the electric drive of rear-view mirrors
   Removal and installation of an internal rear-view mirror
   Removal and installation of elements of the panel of a fairing of a windscreen
   Removal and installation of glass of the top hatch
   Removal and installation of components of the top hatch
   Removal and installation of loker of protection of wheel arches - the general information
   Removal and installation of a door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of elements of furnish of a body
   Removal and installation of forward seats
   Removal and installation of back seats
   Removal and installation of modules of emergency natyazhitel of seat belts of forward seats
   Removal and installation of seat belts
   Removal and installation of the top adjustable anchor knots of seat belts
   Removal and installation of panels of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of a ware box
   Removal and dashboard installation
+ Onboard electric equipment

http://flashlottos24.ru/


Removal and installation of forward seats

Models of cars considered in the real Management are equipped with system of additional safety (SRS). Before starting performance of any works near blocks of safety cushions, a steering column, the dashboard, forward seats disconnect SRS in order to avoid receiving traumas at its casual operation (see. Head Onboard electric equipment). Electroconducting of a chain of SRS is easy for distinguishing on yellow color of isolation.


Elements of fixing of contact sockets of electroconducting of a forward seat

4 — the Nouse of a clamp of the socket
5 — the Red pin of the socket

6 — the Safety pin
7 — the Socket of lateral safety cushions


Forward bolts of fastening of a seat

Removal

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery. Before starting performance of the forthcoming works wait not less than one minute during which the condenser of the independent SRS power supply should be discharged.
  2. In case of need, for the purpose of expansion of working space, turn out fixing screws and remove a superimposed box from the lateral panel.
  1. Having accurately hooked, remove established from the outer side of a seat a plastic cover, then turn out the fixing screw.
  1. Disconnect from a seat a seat belt anchor.
  1. Shift a seat against the stop back, at the corresponding complete set disconnect electroconducting from the module of an emergency natyazhitel of a belt, from the module of a lateral safety cushion, from a heating element of a seat and from the sensor of employment of a seat. For a rassoyedineniye of the socket extend a red clamp and compress a latch (see an illustration Elements of fixing of contact sockets of electroconducting of a forward seat).
  2. Turn out forward bolts of fastening of a seat to a basis frame, - bolts are established in a forward part of both directing rails (see an illustration Forward bolts of fastening of a seat).
  3. Shift seats against the stop forward and turn out back fixing bolts.
  4. Together with the assistant accurately lift a seat and remove it from the car.
  5. In case of need turn out fixture and remove a frame of the basis of a seat from a floor.

Installation

Installation is made as it should be, the return to an order of dismantle of components.

 PERFORMANCE ORDER

  1. Before a vvorachivaniye it is necessary to grease a carving part of fixing bolts with fixing anaerobny hermetic. Track, that all fixture was tightened with demanded effort.