Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of a decorative front grille
   Removal, installation and cowl adjustment
   Removal and installation of loops of a cowl
   Removal and installation of components of the lock of a cowl
   Removal and installation of a cable of a drive of an otpuskaniye of a latch of the lock of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of the internal handle of a door
   Removal and installation of the external handle of a door
   Removal and installation of door locks
   Removal and installation of cylinders of locks of forward doors
   Removal and installation of the drummer of the door lock
   Removal and installation of door glasses
   Removal and installation of a regulator of a window regulator
   Removal and installation of a cover of a luggage compartment (Sedan model)
   Removal and installation of loops of a cover of a luggage compartment
   Removal and installation of components of a cover of a luggage compartment
   Removal and installation of a door of a back (Hatchback models and Versatile person)
   Removal and installation of loops of a door of a back
   Removal and installation of components of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of window regulators (at the corresponding complete set of the car)
   Removal and installation of door rear-view mirrors
   Removal and installation of glass of a door rear-view mirror
   Removal and installation of components of the electric drive of rear-view mirrors
   Removal and installation of an internal rear-view mirror
   Removal and installation of elements of the panel of a fairing of a windscreen
   Removal and installation of glass of the top hatch
   Removal and installation of components of the top hatch
   Removal and installation of loker of protection of wheel arches - the general information
   Removal and installation of a door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of elements of furnish of a body
   Removal and installation of forward seats
   Removal and installation of back seats
   Removal and installation of modules of emergency natyazhitel of seat belts of forward seats
   Removal and installation of seat belts
   Removal and installation of the top adjustable anchor knots of seat belts
   Removal and installation of panels of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of a ware box
   Removal and dashboard installation
+ Onboard electric equipment

http://flashlottos24.ru/


Removal and installation of seat belts


Scheme of fastening of a seat belt of a forward seat

1 — the Top adjustable anchor knot
2 — Nizhny anchor knot / module of an emergency natyazhitel of a belt
3 — Nizhny anchor knot

4 — the Returnable device
5 — the Directing bracket

Forward belt and returnable device

 PERFORMANCE ORDER

  1. Remove a forward seat (see. Removal and installation of forward seats).
  2. Release fixture and remove the coil from the lower part of a rack of V.Snimite the belt end from the coil.
  1. Pull together rubber consolidation from a rack In and remove the top and bottom decorative slips are resistant. Slips fasten clamps which removal will need a shlitsevy screw-driver with a wide sting, - try to remember adjusting position of panels.
  1. Having passed through a groove, liberate a belt from the top finishing panel.
  1. Turn out a fixing bolt and remove a belt loop from the top adjustable anchor knot (see an illustration the Scheme of fastening of a seat belt of a forward seat).
  2. In case of need disconnect the external decorative panel, turn out fixing screws and remove the top adjustable anchor knot from a rack In (see an illustration the Scheme of fastening of a seat belt of a forward seat).
  3. Liberate a belt from a directing bracket on a rack In (see an illustration the Scheme of fastening of a seat belt of a forward seat).
  1. For the purpose of ensuring access to the lower part of a rack In remove an internal decorative overlay of a threshold.
  1. For the purpose of ensuring access to a nut of fastening of the returnable device, take a stopper established from the outer side of a rack of V.Dlya of an otvorachivaniye of a nut from a vvarenny hairpin in a rack the deep face head is required. The hairpin is established in order that the nut did not fail in a rack and under a threshold. Give a nut and remove from a rack a drum of the returnable device the belt together reeled-up on it (see an illustration the Scheme of fastening of a seat belt of a forward seat).
  1. Anchor knot of a seat belt will tighten a bolt to an internal part of a seat, - the same bolt is used also for fastening of the module of an emergency natyazhitel of a belt.
  2. Installation is made upside-down. Before a vvorachivaniye of fixing bolts grease their carving part with fixing anaerobny hermetic. Track, that all fixture was tightened with demanded effort.

Back seat belt and coil

 PERFORMANCE ORDER

  1. Remove the back panel of internal furnish of salon (see. Removal and installation of panels of internal furnish of salon), - one of making elements of this procedure is an otvorachivaniye of a bolt of fastening of the bottom loop of a belt.
  2. Turn out a fixing bolt and remove the top loop, - on the Zafira models it привернута to a height regulator.
  3. On the Zafira models remove a slip and turn out a bolt of fastening of a belt to the bottom lateral panel.
  4. On the Zafira models disconnect directing from a rack With and remove it from a belt.
  5. Turn out a fixing bolt and remove the coil from a body element a drum of the returnable device.
  6. On the Zafira models turn out fixing screws and remove from a rack About the top adjustable anchor knot of a belt.
  7. The bottom anchor knot acts in film by an otdavaniye of a bolt of its fastening after removal of a back pillow of a seat.
  8. Installation is made upside-down. Before a vvorachivaniye of fixing bolts grease their carving part with fixing anaerobny hermetic. Track, that all fixture was tightened with demanded effort.

Seat belt of the third row of seats and coil (Zafira)

 PERFORMANCE ORDER

  1. Remove a covering of a floor of a luggage compartment.
  2. Remove the top section of lateral furnish of a luggage compartment.
  1. Remove a cap and give the screw of fastening of anchor knot of a seat belt to the Page rack.
  1. Also remove the bottom loop.
  1. Turn out fixing screws and remove from a rack With directing a belt.
  2. Remove the bottom section of lateral furnish of a luggage compartment.
  1. Turn out a fixing bolt and remove from the body panel a drum of the returnable device of a belt.
  1. For removal of the bottom anchor knot it is necessary to dismantle the central slip.
  1. Installation is made upside-down. Before a vvorachivaniye of fixing bolts grease their carving part with fixing anaerobny hermetic. Track, that all fixture was tightened with demanded effort.

Central belt of the third row of seats (Zafira)

 PERFORMANCE ORDER

  1. Remove a pillow and a back of a back seat (see. Removal and installation of back seats).
  2. For the purpose of ensuring access to anchor knots of the central seat belt turn out fixing screws and uncover.
  3. Turn out fixing bolts and remove anchor knots from the floor panel.
  4. Disconnect from the coil a cable and turn out a bolt of fastening of the coil to a back.
  5. Installation is made upside-down, - track, that all fixture was tightened with demanded effort.