Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of a decorative front grille
   Removal, installation and cowl adjustment
   Removal and installation of loops of a cowl
   Removal and installation of components of the lock of a cowl
   Removal and installation of a cable of a drive of an otpuskaniye of a latch of the lock of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of the internal handle of a door
   Removal and installation of the external handle of a door
   Removal and installation of door locks
   Removal and installation of cylinders of locks of forward doors
   Removal and installation of the drummer of the door lock
   Removal and installation of door glasses
   Removal and installation of a regulator of a window regulator
   Removal and installation of a cover of a luggage compartment (Sedan model)
   Removal and installation of loops of a cover of a luggage compartment
   Removal and installation of components of a cover of a luggage compartment
   Removal and installation of a door of a back (Hatchback models and Versatile person)
   Removal and installation of loops of a door of a back
   Removal and installation of components of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of window regulators (at the corresponding complete set of the car)
   Removal and installation of door rear-view mirrors
   Removal and installation of glass of a door rear-view mirror
   Removal and installation of components of the electric drive of rear-view mirrors
   Removal and installation of an internal rear-view mirror
   Removal and installation of elements of the panel of a fairing of a windscreen
   Removal and installation of glass of the top hatch
   Removal and installation of components of the top hatch
   Removal and installation of loker of protection of wheel arches - the general information
   Removal and installation of a door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of elements of furnish of a body
   Removal and installation of forward seats
   Removal and installation of back seats
   Removal and installation of modules of emergency natyazhitel of seat belts of forward seats
   Removal and installation of seat belts
   Removal and installation of the top adjustable anchor knots of seat belts
   Removal and installation of panels of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of a ware box
   Removal and dashboard installation
+ Onboard electric equipment




Removal and installation of bumpers

Front bumper

Removal

 PERFORMANCE ORDER

  1. Under the car remove three plastic clamps of fastening of an overlay of a front bumper to the panel of protection of a case. For removal two-componental it is necessary to liberate from it the central pin then to take external sections.
  2. Turn out lateral fixing screws and the bottom screws of fastening to an overlay of a bumper of loker.
  3. Ask the assistant to hold a bumper, remove plastic caps and turn out the top screws of fastening of a slip to the front panel.

    Scheme of an arrangement of elements of fixture of an overlay of a front bumper

  1. Accurately separate lateral sections of an overlay of a bumper from wings, and, having pulled forward, remove a slip. On the models equipped with fog lights and washers of lenses of head headlights, having removed a bumper, disconnect the corresponding electroconducting. In case of need disconnect conducting from the sensor of temperature of external air.
  1. Release fixing clamps and separate from an overlay of a bumper the spoiler panel.

    A — the spoiler Panel
    B — Forward clamps of a spoiler
    C — Lateral clamps of a spoiler

A.

B.

C.
  1. Give fixing nuts and remove from the car bearing beam of a bumper.

Installation

Installation is made as it should be, the return to an order of dismantle of components.

 PERFORMANCE ORDER

  1. Check a condition of polystyrene laying of a front bumper, in case of need make its replacement.

Rear bumper

 PERFORMANCE ORDER

  1. Open a door a back / cover of a luggage compartment.
  1. Under the car turn out bolts of fastening of the lower part of a bumper to the back panel.
  2. In a back part of wheel arches turn out on two screws of fastening of loker to an overlay of a bumper.
  3. Ask the assistant to hold a bumper and turn out the top fixing bolts.

    A — the Scheme of an arrangement of elements of fixture of an overlay of a rear bumper (Astra model)
    B — the Scheme of an arrangement of elements of fixture of an overlay of a rear bumper (Zafira model)



B.
  1. Accurately remove lateral sections of a bumper from directing arms on wings and, having pulled back, separate a bumper from the car.

On the Zafira models equipped with the hook-on device for ensuring access to a turnbuckle it is enough to shift latches inside and to uncover.

Installation is made upside-down.