Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of electric equipment
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of external lighting/alarm devices
   Adjustment of the direction of optical axes of headlights
   Removal and installation of a combination of devices
   Removal and installation of components of the dashboard
   Removal and lighter installation
   Removal and installation of horns of a horn
   Removal and installation of levers (leads) of screen wipers
   Removal and installation of elements of a drive of screen wipers
   Removal and installation of components of system of washing of glasses
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Removal and audiosystem installation / navigation block
   Removal and installation of elements of remote control by audiosystem functioning
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   Anticreeping system and system of an immobilization of the engine - the general information
   The sensor of speed of movement of the car (VSS) - the general information
   System of additional safety (SRS) - the general information
   Removal and installation of the elements SRS
   Schemes of electric connections - the general information
   + Schematic diagrams of electric connections

http://flashlottos24.ru/


Removal and installation of components of the dashboard

New multipurpose after installation it should be programmed at firm car repair shop Opel.

Multipurpose display

Astra models

 PERFORMANCE ORDER

  1. Remove a forward ashtray (see. Head Body).
  2. Remove from the dashboard a box cover for trifles (see. Head Body).
  3. Remove a radio tape recorder and its assembly box (see. Check of serviceability of functioning and regenerative repair of a heater of back glass).
  4. At the corresponding complete set remove the block of navigation of GPS.
  5. Remove from an overlay of the dashboard the control panel functioning of systems of heating / ventilation / air conditioning (see. Head of System of cooling, heating).
  6. Remove from the dashboard deflectors of the central air lines (see. Head of System of cooling, heating).
  7. Remove a decorative overlay of the dashboard and disconnect electroconducting from the multipurpose display. Also disunite the contact socket of the switch of the alarm system (see. Removal and installation of switches).
  1. From the back party of a slip turn out fixing screws.
  1. Remove the block of the multipurpose display.
  1. Installation is made upside-down.

Zafira models

 PERFORMANCE ORDER

  1. Remove a forward ashtray (see. Head Body).
  2. Turn out two bottom fixing screws and separate from the dashboard the control panel functioning of systems of heating / ventilation / air conditioning (see. Head of System of cooling, heating).
  3. Remove the switch of the alarm system and disconnect from it the electroconducting socket (see. Removal and installation of switches).
  4. Remove the control panel functioning of systems of heating / ventilation / air conditioning.
  5. Remove a steering wheel (see. Head the Suspension bracket and a steering), - do not forget to disconnect the storage battery previously.
  6. Turn out fixing screws and remove sections of a casing of a steering column (see. Head Suspension bracket and steering). Take away down the control lever handle the provision of a column.
  7. Release fixture and remove from a steering column podrulevy switches (see. Removal and installation of switches).
  8. Remove a radio receiver (see. Check of serviceability of functioning and regenerative repair of a heater of back glass).
  9. Remove the switch of management of functioning of lighting devices (see. Removal and installation of switches).
  10. Remove from the dashboard a cover of the assembly block of safety locks.
  11. Having passed a screw-driver in a groove of a lattice of the deflector of a lateral air line, turn out the fixing screw and remove the deflector.
  12. Turn out screws of fastening of facing of an instrument guard to the dashboard (three screws over a guard, on one from both parties of a steering column and on one in bottom corners of a facing frame).
  1. Remove facing of an instrument guard from the dashboard, at the same time also having removed with directing the switch of management of functioning of lighting devices. Disconnect electroconducting from the block of the multipurpose display, then separate the remained plaits from a facing frame of a frame.
  1. Remove the block of the multipurpose display from the facing panel.
  2. Installation is made upside-down.

Sensor of temperature of external air

 PERFORMANCE ORDER

  1. Having opened a cowl, disconnect electroconducting from the sensor established in assembly of a front bumper.
  1. Turn the sensor and remove it from a bumper.
  1. Installation is made upside-down.

The sensor of temperature of cooling liquid

See. Head of System of cooling, heating.

The sensor switch of level of cooling liquid

The sensor switch is established in the basis of a broad tank of system of cooling.

 PERFORMANCE ORDER

  1. Partially merge cooling liquid, the sensor (will not open yet see. Head of System of cooling, heating). Remove a broad tank and disconnect from the sensor electroconducting.
  2. Having overturned a tank, a screw-driver release the sensor.
  3. Installation is made upside-down.

The sensor switch of level of liquid in the tank of liquid of washing of glasses

The sensor switch is established at the left under a front bumper.

 PERFORMANCE ORDER

  1. Remove a bumper (see. Head Body).
  2. Disconnect from located the tank of washing liquid of the sensor electroconducting.
  3. Accurately remove the sensor from the tank.
  4. Installation is made upside-down.

Sensor switch of level of oil

 PERFORMANCE ORDER

  1. Remove the case pallet (see. Head Engine).
  2. Remove from the pallet fixing ring.
  3. Separate from the pallet the contact socket of the sensor of level of oil.
  4. Turn out fixing bolts and remove the sensor from the pallet assembled with a sealing ring, - the ring is subject to replacement without fail.
  5. Installation is made upside-down. Do not forget to replace a sealing ring. The description of procedure of installation of the pallet see. Head Engine.