Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
- Engine
   Specifications
   Check of kompressionny pressure in cylinders
   Diagnostics of a condition of the engine with use of the vacuum gage
   - Procedures of repair of petrol SOHC engines without their extraction from the car
      Reduction of the piston of the first cylinder in the provision of the top dead point of a step of compression (VMT)
      Removal and installation of a cover of the gas-distributing mechanism
      Removal and installation of a pulley of a cranked shaft
      Removal and installation of a cover of a drive of GRM
      Removal and installation of a belt of a drive of GRM
      Removal and installation of a natyazhitel of a gas-distributing belt and cogwheels of a drive of GRM
      Replacement of an epiploon of a camshaft
      Removal, check of a condition and camshaft installation with the case of the gas-distributing mechanism
      Removal, check of a condition and installation of components of a drive of valves
      Removal and installation of a head of cylinders
      Removal and installation of the pallet of a case
      Removal, service and installation of the oil pump
      Removal, check of a condition and flywheel installation / driving disk
      Replacement of epiploons of a cranked shaft
      Check of a condition and replacement of support of a suspension bracket of the power unit
   + Procedures of repair of petrol DOHC engines without their extraction from the car
   + Procedures of repair of diesel engines of 1.7 l and 2.0 l without their extraction from the car
   + General and major maintenance of the engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

http://flashlottos24.ru/


Replacement of an epiploon of a camshaft

 PERFORMANCE ORDER

  1. Remove a camshaft cogwheel (see. Removal and installation of a natyazhitel of a gas-distributing belt and cogwheels of a drive of GRM).
  1. Accurately punch or drill in a firm face surface of an epiploon pair of small openings in which screw two самореза. Having grasped flat-nose pliers heads саморезов, take an epiploon from the landing nest.
  1. Smooth out walls of a landing nest of an epiploon, having removed from them small jags and the roughnesses, capable to bring to an exit of a new epiploon out of operation.
  1. Grease sealing sponges of a new epiploon with pure impellent oil and by means of a cylindrical opravka press and press an epiploon in a nest aflush with a head surface (sponges inside) — rest an opravka against the rigid external region of a face surface of an epiploon, try not to damage working edges.

As an opravka it is possible to use a replaceable face head of the suitable size, or a piece of a pipe of suitable diameter.

  1. Establish into place a camshaft cogwheel (see. Removal and installation of a natyazhitel of a gas-distributing belt and cogwheels of a drive of GRM).