Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
- Engine
   Specifications
   Check of kompressionny pressure in cylinders
   Diagnostics of a condition of the engine with use of the vacuum gage
   + Procedures of repair of petrol SOHC engines without their extraction from the car
   + Procedures of repair of petrol DOHC engines without their extraction from the car
   - Procedures of repair of diesel engines of 1.7 l and 2.0 l without their extraction from the car
      Reduction of the piston of the first cylinder in the provision of the top dead point of the end of a step of compression (VMT)
      Check and adjustment of phases of a gazoraspredeleniye (engines of 2.0 l)
      Removal and installation of a cover of the gas-distributing mechanism
      Removal and installation of a pulley of a cranked shaft
      Removal and installation of a cover of a drive of GRM
      Removal and installation of natyazhitel of chains of a drive of GRM (engines of 2.0 l)
      Removal and installation of a belt of a drive of GRM
      Removal and installation of a natyazhitel of a belt and cogwheels of a drive of GRM (engines of 1.7 l)
      Removal and installations of chains and asterisks of a drive of GRM, check of a condition of components (engines of 2.0 l)
      Replacement of an epiploon of a camshaft (engines of 1.7 l)
      Check and adjustment of gaps of valves (engines of 1.7 l of DOHC)
      Removal and camshaft installation (ов) and components of a drive of valves
      Removal and installation of the case of the gas-distributing mechanism (engines of 1.7 l of DOHC)
      Removal and installation of a head of cylinders
      Removal and installation of the pallet of a case
      Removal, service and installation of the oil pump
      Replacement of an epiploon of the oil pump (engines of 1.7 l)
      Removal and installation of a maslookhladitel
      Removal, check of a condition and flywheel installation / driving disk
      Replacement of epiploons of a cranked shaft
      Check of a condition and replacement of support of a suspension bracket of the power unit
   + General and major maintenance of the engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

http://flashlottos24.ru/


Replacement of an epiploon of the oil pump (engines of 1.7 l)

 PERFORMANCE ORDER

  1. Remove a cogwheel of a cranked shaft (see. Removal and installation of a natyazhitel of a belt and cogwheels of a drive of GRM (engines of 1.7 l).
  1. Accurately punch or drill two small openings in a rigid end face of an epiploon. Screw in openings on саморезу and, having grasped heads of screws flat-nose pliers, take an epiploon from the landing nest.

Observe extreme care — try not to damage the pump!

  1. Clear walls of a landing nest of an epiploon, accurately by means of a shaber remove agnails and the teases, capable to bring to failure of a new epiploon.
  2. Grease sealing sponges of a new epiploon with pure impellent oil and press an epiploon aflush with a surface of a cover of the pump (sponges inside) — use a suitable cylindrical opravka (see. Removal, service and installation of the oil pump, Installation — Engines of 1.7 l of SOHC) Track, that working edges of a cuff looked in the engine.
  3. Establish a cogwheel of a cranked shaft (see. Removal and installation of a natyazhitel of a belt and cogwheels of a drive of GRM (engines of 1.7 l).