Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
- Power supply system and release
   - Power supply system
      Sbrasyvaniye of pressure in a power supply system of petrol engines
      Check of a condition and replacement of fuel lines and their shtutserny connections
      Air removal from a fuel path of the diesel engine
      Removal of pollution from a power supply system of the diesel engine
      Removal and installation of components of an inlet air path
      Removal, installation and adjustment of a cable of gas - petrol models
      Removal and installation of a pedal of an accelerator
      Removal and installation of the fuel pump - petrol models
      Removal and installation of the sensor of a stock of fuel
      Removal and installation of a fuel tank
      Removal and installation of the case of a throttle - petrol models
   + System of injection of fuel of petrol engines
   + Systems of injection and turbo-supercharging of the diesel engine
   + Systems of release and decrease in toxicity of the fulfilled gases
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

http://flashlottos24.ru/


Removal and installation of the sensor of a stock of fuel

See the prevention at the beginning of pressure Sbrasyvaniye's section in a power supply system of petrol engines.


At installation the new sealing ring of a cover is required.


 PERFORMANCE ORDER

  1. On petrol models the sensor of a stock of fuel is located on one frame with the fuel pump and is fixed sideways on the case of the last. Act according to instructions – see. Removal and installation of the fuel pump - petrol models.
  1. For sensor removal accurately release elements of its fixture (1 - a clamp), then, having pulled up, liberate the sensor from a support.
  1. On diesel engines the sensor is placed in the frame lowered in a fuel tank, - act according to instructions – see. Removal and installation of the fuel pump - petrol models.
  2. At sensor extraction from an opening in a tank and its installation back try not to allow deformations of the lever of a measuring float.