Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
- Engine electric equipment
   Specifications
   - Electronic control system of ignition (and injection) petrol engines
      Checks of serviceability of functioning of system of ignition
      Diagnostics of malfunctions - the general information and preliminary checks
      System of onboard self-diagnostics of OBD - the general information
      Oscillograph application for supervision of workers of a control system
      Removal and installation of the module of ignition
      Check and installation of a corner of an advancing of ignition
      Removal and installation of the switch of ignition
      Removal and installation of the sensor of emergency pressure of oil
      Removal and installation of the sensor of level of impellent oil
      Removal and installation of the sensor of temperature of impellent oil (diesel models)
   + Systems of preheat and heating of fuel of the diesel engine
   + charge and start Systems
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Removal and installation of the sensor of temperature of impellent oil (diesel models)

Removal

 PERFORMANCE ORDER

  1. At the corresponding complete set remove protection of a case.
  2. Turn out a drain stopper and merge impellent oil (see. Head Routine maintenance).
  3. The sensor (if it is established) is in a forward part of the pallet of a case of the engine, - disconnect from it electroconducting.
  1. Turn out the sensor from the pallet.

Installation

 PERFORMANCE ORDER

  1. Establish a new sealing ring and slightly grease a carving part of the sensor with fixing hermetic.
  2. Screw the sensor in the pallet, - try not to strip a thread.
  3. Attach electroconducting.
  4. Establish protection of a case.
  5. In summary fill in oil in the engine (see. Head Routine maintenance).