Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
- Manual transmission
   Specifications
   Adjustment of a drive of gear shifting
   Removal and installation of the mechanism of gear shifting
   Replacement of epiploons
   Check of serviceability of functioning, removal and installation of the sensor switch of fires of a backing
   Removal and installation of the sensor of speed (VSS)
   Replacement of transmission oil
   Removal and RKPP installation
   RKPP repair - the general information
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Check of serviceability of functioning, removal and installation of the sensor switch of fires of a backing

Check

A food to lamps of fires of a backing moves via the sensor switch of plunzherny type screwed in the top part of a case of RKPP.

 PERFORMANCE ORDER

  1. At refusal of operation of fires, first of all check integrity of the corresponding safety lock.
  2. Disconnect from the sensor switch electroconducting. By means of an ohmmeter or a lamp sampler make sure of serviceability of transition of the sensor switch in the closed condition at a choice of a reverse gear. In case of need make sensor switch replacement, - previously check on existence of signs of break or short circuit the corresponding electroconducting.

Removal

F13, F17 and F18 models

 PERFORMANCE ORDER

  1. For the purpose of ensuring adequate access remove the storage battery with the adjusting pallet (see. Head engine Electric equipment).
  1. Disconnect from the sensor switch electroconducting, turn out it from a case of RKPP and remove assembled with a sealing washer.

F23 model

 PERFORMANCE ORDER

  1. Cock the parking brake, поддомкратьте a front of the car and establish it on props, at the corresponding complete set remove protection of a case.
  1. Disconnect from the sensor switch (2) electroconducting (1), turn out it from a case of RKPP and remove assembled with a sealing washer.

Installation

F17 and F18 models

 PERFORMANCE ORDER

  1. Having replaced a sealing washer, screw the sensor switch in a case of RKPP and tighten with demanded effort. Connect electroconducting and, - if removed, - establish into place the storage battery. Check serviceability of functioning of the sensor switch.

F23 model

 PERFORMANCE ORDER

  1. Having replaced a sealing washer, screw the sensor switch in a case of RKPP and tighten with demanded effort. Connect electroconducting, at the corresponding complete set establish protection of a case, then lower the car on the earth.