Opel Astra, Zafira

since 1998 of release

Repair and car operation

Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
- Automatic transmission
   Adjustment of the mechanism of a choice of transfers
   Removal and installation of a cable of a choice of transfers
   Removal and installation of assembly of the lever of the AT selector
   Replacement of epiploons
   ATF cooler - the general information
   Removal and installation of electric components of a control system of AT
   Removal and AT installation
   Major maintenance of AT - the general information
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Replacement of epiploons

Epiploons of power shafts

See. Check of serviceability of functioning, removal and installation of the sensor switch of fires of a backing.

Epiploon of a shaft of the hydrotransformer


  1. Remove transmission (see. Removal and AT installation).
  2. Accurately shift hydrotransformer assembly on a shaft — prepare for collecting spilled liquid.
  3. Try to remember location and an order of installation of an epiploon in the pump case. Having accurately hooked a big screw-driver, take an old epiploon — try not to damage walls of a landing nest and a surface of a pin of a shaft.
  4. Carefully smooth out surfaces of a landing nest interfaced to an epiploon and shaft pins, then it is accurate, press a new epiploon in a landing nest sealing sponges in transmission.
  5. Grease sponges of an epiploon of fresh ATF and accurately shift the hydrotransformer on a shaft in transmission.
  6. Establish transmission on a place (see. Removal and AT installation).