Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
- Automatic transmission
   Specifications
   Adjustment of the mechanism of a choice of transfers
   Removal and installation of a cable of a choice of transfers
   Removal and installation of assembly of the lever of the AT selector
   Replacement of epiploons
   ATF cooler - the general information
   Removal and installation of electric components of a control system of AT
   Removal and AT installation
   Major maintenance of AT - the general information
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Adjustment of the mechanism of a choice of transfers

Shutdown of the storage battery in the position "R" of the lever of the selector will lead to blocking of the last. For release of the lever it is necessary to remove accurately from the central console the sealing element established round its basis, then a small screw-driver with a flat sting to wring out a lock uvula to the left of the selector lever.


 PERFORMANCE ORDER

  1. Translate the selector lever in salon from extreme forward situation in extreme back, and make sure of compliance of serially chosen provisions to indicator indications — in case of need demanded adjustment (see further).
  2. Establish the lever in the situation "P".
  3. For the purpose of ensuring access to a cable of a choice of transfers remove the storage battery with the adjusting pallet (see. Head engine Electric equipment).
  1. Find from above on a transmission case a basic arm of fastening of a cable of a choice of transfer liberate from it a tip of the last, having accurately extended a clamp.
  1. Make sure of that the lever of the selector is in the situation "R", then develop the executive lever on a transmission case forward against the stop, having switched subjects AT in the situation "R". Having latched a clamp, fix a cable of a choice of transfers in this situation.
  1. Establish and connect the storage battery, then check serviceability of functioning of the selector — in case of need repeat adjustment.