Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
- Power supply system and release
   + Power supply system
   + System of injection of fuel of petrol engines
   - Systems of injection and turbo-supercharging of the diesel engine
      Check and adjustment of the maximum turns of the engine
      Check and adjustment of installations of the moments of injection of fuel
      Removal and installation of electric components of a power supply system
      Signals and tension on conclusions of the module of management
      Removal and TNVD installation
      Removal and installation of fuel nozzles
      Removal and turbokompressor installation
      Removal and installation of an intermediate cooler (interkuler)
      Removal and installation of the inlet pipeline
      Removal and installation of a final collector
   + Systems of release and decrease in toxicity of the fulfilled gases
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Removal and turbokompressor installation

Removal

 PERFORMANCE ORDER

  1. Remove a final collector and turbokompressor assembly (see. Removal and installation of a final collector).
  1. Transfer assembly of a final collector with a turbokompressor on a workbench, give fixing bolts / nuts and remove a final connecting flange with sealing laying.

    A — Bolts of fastening of a landing flange to a turbokompressor (to model of 1.7 l of SOHC and 2.0 l)
    B — Nuts of fastening of a landing flange to a turbokompressor (model of 1.7 l of DOHC)

A.

B.
  1. Give shtutserny nuts and disconnect a maslopodayushchy tube from the block of cylinders and a turbokompressor, - prepare for collecting spilled oil.

    A — Maslopodayushchaya a turbokompressor tube (models of 1.7 l of SOHC and 2.0 l)
    B — Maslopodayushchaya a turbokompressor tube (model of 1.7 l of DOHC)

A.

B.
  1. Turn out fixing bolts and remove a maslovozvratny tube with laying.
  1. Give fixing bolts / nuts and remove from a collector a turbokompressor with sealing laying.

    A — Three bolts of TORX of fastening of a turbokompressor to a final collector (to model of 1.7 l of SOHC and 2.0 l)
    B — Nuts of fastening of a turbokompressor to a final collector (model of 1.7 l of DOHC)



Do not make attempts of independent dismantling of a turbokompressor, - in case of need address for the help to specialists of car-care center.

Installation

Installation is made upside-down.

 PERFORMANCE ORDER

  1. Do not forget to replace sealing elements. All fixture tighten with demanded effort.
  2. In summary establish collector assembly with a turbokompressor on the car (see. Removal and installation of a final collector).