Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of a decorative front grille
   Removal, installation and cowl adjustment
   Removal and installation of loops of a cowl
   Removal and installation of components of the lock of a cowl
   Removal and installation of a cable of a drive of an otpuskaniye of a latch of the lock of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of the internal handle of a door
   Removal and installation of the external handle of a door
   Removal and installation of door locks
   Removal and installation of cylinders of locks of forward doors
   Removal and installation of the drummer of the door lock
   Removal and installation of door glasses
   Removal and installation of a regulator of a window regulator
   Removal and installation of a cover of a luggage compartment (Sedan model)
   Removal and installation of loops of a cover of a luggage compartment
   Removal and installation of components of a cover of a luggage compartment
   Removal and installation of a door of a back (Hatchback models and Versatile person)
   Removal and installation of loops of a door of a back
   Removal and installation of components of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of window regulators (at the corresponding complete set of the car)
   Removal and installation of door rear-view mirrors
   Removal and installation of glass of a door rear-view mirror
   Removal and installation of components of the electric drive of rear-view mirrors
   Removal and installation of an internal rear-view mirror
   Removal and installation of elements of the panel of a fairing of a windscreen
   Removal and installation of glass of the top hatch
   Removal and installation of components of the top hatch
   Removal and installation of loker of protection of wheel arches - the general information
   Removal and installation of a door of the hatch of a jellied mouth of a fuel tank
   Removal and installation of elements of furnish of a body
   Removal and installation of forward seats
   Removal and installation of back seats
   Removal and installation of modules of emergency natyazhitel of seat belts of forward seats
   Removal and installation of seat belts
   Removal and installation of the top adjustable anchor knots of seat belts
   Removal and installation of panels of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of a ware box
   Removal and dashboard installation
+ Onboard electric equipment




Removal and installation of components of the top hatch

Assembly of the top hatch is among enough difficult components, including a set of details. Originators of the real Management insistently do not recommend to make attempt of its dismantling without special need. If the hatch is faulty, or needs under repair, it will be more reasonable than everything to address for the help to specialists of car-care center.




In an emergency the hatch can be open manually, by removal of a cover from the forward salonny lamp and rotation of the driving electromotor by a screw-driver rotating the motor.

Vetrootboynik (deflector)

 PERFORMANCE ORDER

  1. Open the panel of glass of the hatch and turn out bolts. The handles established from two parties.
  2. Disconnect from a pin a spring lift the deflector up.
  3. Having turned, liberate a spring from the directing.
  4. Installation is made upside-down.

Electric drive

The electric drive is established in a roof behind a ceiling upholstery of salon. Removal of a ceiling upholstery is interfaced with demontazhy the forward salonny lamp, sun-protection peaks and ceiling handles, demands special accuracy and attention. It will be most reasonable to charge performance of this work to specialists of car-care center.

  •  PERFORMANCE ORDER

    1. Having removed section of a ceiling upholstery, disconnect electroconducting from the driving electromotor.
    1. Turn out fixing screws and remove electric drive assembly from the roof panel.
    2. Before electric drive installation, establish the switch in a starting position, - drilling in a gear drive should appear located between two external ledges.
    3. Further installation is made as it should be, the return to an order of dismantle of components.

    Management cable - adjustment

     PERFORMANCE ORDER

    1. Remove the electric drive (see above).
    2. Weaken forward and back directing screws. Combine forward and back directing pins with openings on the directing.
    3. Pass a drill in diameter of 4.0 mm through back directing, fill it in an arm and screw screws.
    4. Establish the electric drive (see above).

    Management switch

     PERFORMANCE ORDER

    1. Remove the forward salonny lamp (see. Head Onboard electric equipment).
    2. Having accurately hooked the suitable tool through an opening under lamp installation, liberate the switch from a ceiling upholstery.
    3. Disconnect electroconducting and remove the switch.
    4. Installation is made upside-down.

    Mechanical drive

     PERFORMANCE ORDER

    1. Completely open the hatch.
    2. On hatches with a mechanical drive turn out the fixing screw and remove the handle from a shlitsevy part of an axis.
    3. On hatches with the electric drive, having hooked a small screw-driver, remove an emergency cover in a back part of the case of the forward salonny lamp.
    4. Remove a lens of the lamp and disconnect electroconducting.
    5. Turn out fixing screws and lower down from a ceiling a decorative overlay of the hatch.
    6. Turn out two screws and lower a drive from a roof down.
    7. Installation is made upside-down, - before carry out adjustment. Turn a drive completely clockwise, without combining a lock pin (if a pin to combine, the drive completely will not turn, - in case of need take a pin).