Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of electric equipment
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of external lighting/alarm devices
   Adjustment of the direction of optical axes of headlights
   Removal and installation of a combination of devices
   Removal and installation of components of the dashboard
   Removal and lighter installation
   Removal and installation of horns of a horn
   Removal and installation of levers (leads) of screen wipers
   Removal and installation of elements of a drive of screen wipers
   Removal and installation of components of system of washing of glasses
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Removal and audiosystem installation / navigation block
   Removal and installation of elements of remote control by audiosystem functioning
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   Anticreeping system and system of an immobilization of the engine - the general information
   The sensor of speed of movement of the car (VSS) - the general information
   System of additional safety (SRS) - the general information
   Removal and installation of the elements SRS
   Schemes of electric connections - the general information
   + Schematic diagrams of electric connections

http://flashlottos24.ru/


Removal and installation of elements of a drive of screen wipers

Windscreen cleaners

 PERFORMANCE ORDER

  1. Remove levers of both screen wipers (see. Removal and installation of levers (leads) of screen wipers).
  2. Remove rubber consolidation from the upper edge of a partition of an impellent compartment and a plastic lattice of the reflector established under a windscreen (see illustrations the Scheme of an arrangement of the elements subject to removal established along bottom edge of a windscreen (Astra model) and the Scheme of an arrangement of elements, established along bottom edge of a windscreen (Astra model)).
  1. Disconnect hoses from snuffled giving on glass of washing liquid.
  1. Where it is required, give fixing nuts and remove from a partition a reflector.

    A — Otdavaniye of a nut of fastening of a reflector (Zafira model)
    B — Removal of a plate of a reflector from a partition of an impellent compartment

A.

B.
  1. Disconnect conducting from the electromotor of a drive of cleaners of a windscreen.
  2. Turn out fixing bolts and the electromotor assembled with driving drafts.
  1. In case of need the electromotor can be removed from the driving mechanism, - disconnect draft from the hinge and turn out bolts of fastening of the motor. The remained drafts in case of need as can are dismantled.
  1. Clear components of the driving mechanism and check a condition of axes and hinges. Faulty components replace.
  2. Installation is made upside-down. Before assembly grease mobile knots of the driving mechanism with silicone greasing. The description of procedure of installation of levers of screen wipers see. Removal and installation of levers (leads) of screen wipers.

Cleaner of back glass (Hatchback model and Versatile person / Zafira)

 PERFORMANCE ORDER

  1. Remove the screen wiper lever (see. Removal and installation of levers (leads) of screen wipers).
  2. Remove panels of an internal upholstery of a door of a back (see. Head Body).
  3. On the Astra models remove the cylinder of the lock of a door (see. Head Body).
  4. Disconnect from the driving motor electroconducting.
  1. Turn out fixing bolts and remove the motor, having liberated the case of its axis from the rubber plug through passage in the external panel of a doorframe.


  1. In case of need take from the door panel the rubber plug through passage. The damaged plug is subject to replacement.
  1. Installation is made upside-down. Track, that all fixture was tightened with demanded effort. The description of procedure of installation of the lever of a screen wiper see. Removal and installation of levers (leads) of screen wipers.