Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of electric equipment
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of external lighting/alarm devices
   Adjustment of the direction of optical axes of headlights
   Removal and installation of a combination of devices
   Removal and installation of components of the dashboard
   Removal and lighter installation
   Removal and installation of horns of a horn
   Removal and installation of levers (leads) of screen wipers
   Removal and installation of elements of a drive of screen wipers
   Removal and installation of components of system of washing of glasses
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Removal and audiosystem installation / navigation block
   Removal and installation of elements of remote control by audiosystem functioning
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   Anticreeping system and system of an immobilization of the engine - the general information
   The sensor of speed of movement of the car (VSS) - the general information
   System of additional safety (SRS) - the general information
   Removal and installation of the elements SRS
   Schemes of electric connections - the general information
   + Schematic diagrams of electric connections




Removal and installation of switches

Lock of ignition / blocking of a steering column

Cylinder of the lock of blocking of a steering column

 PERFORMANCE ORDER

  1. Remove a steering wheel (see. Head the Suspension bracket and a steering), - do not forget to disconnect the storage battery previously.
  1. Turn out fixing screws and remove sections of a casing of a steering column, remove the handle of the lever of adjustment of provision of a column.

    A — Screws of fastening of casings of a steering column (Astra model)
    B — Screws of fastening of a casing of a steering column (Zafira model)

A.

B.
  1. Remove from a column right podrulevy the switch (see below). In case of need remove from the ignition lock the transceiver of system of an immobilization, disconnect from the transceiver electroconducting.
  2. Insert the ignition key and turn it in situation I.
  1. Hour screw-driver or the blunted pricker wring out a clamp through an opening in the top part of a steering column and, having pulled for a key, take the lock cylinder.
  1. For installation of the cylinder push it in the case of zamkovy assembly to a clamp zashchelkivaniye, then turn a key in situation 0 and take it. At the blocked steering column to execute installation of the cylinder it will not be possible, in this case it is necessary to wring out before a screw-driver down a blocking pin in the lock case.

Ignition switch

 PERFORMANCE ORDER

  1. Remove the lock cylinder (see above), or insert into the lock a key and turn it in situation 0.
  2. Pass an hour screw-driver in an opening in a bottom of the switch and wring out an internal clamp, then, having hooked the second screw-driver, disunite the contact socket of electroconducting.
  3. Having disunited the socket, release fixture and remove the ignition switch (contact group).
  4. Installation is made upside-down.

Podrulevye switches

 PERFORMANCE ORDER

  1. Removal of both podrulevy switches is carried out according to the uniform scheme.
  2. Remove a steering wheel (see. Head the Suspension bracket and a steering), - do not forget to disconnect the battery previously.
  1. Release fixture of the lever of a drive of the mechanism of adjustment of provision of a steering column, turn out fixing screws and remove the top and bottom sections of a casing of a steering column.

    A — Screws of fastening of casings of a steering column (Astra model)
    B — Screws of fastening of a casing of a steering column (Zafira model)

A.

B.
  1. Compress the lock uvulas located along the edges of assembly and accurately separate the block of switches from a steering column.
  1. Disconnect electroconducting and remove the switch. At the corresponding complete set disconnect electroconducting from the control panel functioning темпостата.
  1. Installation is made upside-down.

Switches of management of functioning of external lighting devices

 PERFORMANCE ORDER

  1. Having hooked a small screw-driver, release clamps and remove the switch of management of functioning of lighting devices.
  1. Having passed pair of small screw-drivers in an opening under switch installation, release clamps and remove the panel of switches, - pay attention that the socket of electroconducting remains in the dashboard.
  1. In case of need replace an illumination lamp (see. Section Replacement of lamps of internal lighting devices).
  2. Installation is made upside-down.

Switch of the alarm system

 PERFORMANCE ORDER

  1. Having accurately hooked a screw-driver remove facing of the push-button switch of the alarm system.
  1. Having passed two screw-drivers to canals on each side buttons, accurately liberate from the dashboard.
  1. Installation is made upside-down

Switch of a choice of high-speed modes of functioning of the fan of a heater

 PERFORMANCE ORDER

  1. Remove the control panel functioning of systems of heating / ventilation / conditioning (see. Head of System of cooling, heating).
  2. Having accurately hooked, remove from the panel the rotary handle of a choice of high-speed modes of the fan.
  3. Having wrung out four clamps, squeeze out the switch from the back party of the panel.
  4. Installation is made upside-down.

Sensors switches of stoplights and control lamp of raising of the parking brake

See. Head Brake system.

Sensors switches of publicizing of salon / illumination of thresholds when opening doors and illumination of a luggage compartment

 PERFORMANCE ORDER

  1. Turn out the fixing screw and remove the sensor switch.
  1. Disconnect electroconducting and fix a plait on a rack an adhesive tape. At removal of the sensor switch of a door of a back it is simpler to remove at first internal decorative slips and to disconnect from the sensor switch electroconducting.
  2. Check reliability of contact of the fixing screw with metal of a body and the sensor switch, - in case of need smooth out a contact spot.
  3. Installation is made upside-down.

Switch of management of functioning of the electric drive of the top hatch

 PERFORMANCE ORDER

  1. Remove the forward salonny lamp (see. Section Replacement of lamps of internal lighting devices).
  2. Turn out fastening screws to a control panel ceiling functioning of the electric drive of the top hatch.
  1. Remove the control panel and disconnect electroconducting from the keyboard switch.
  1. Remove from the panel the switch.
  1. Installation is made upside-down.