Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of a rotary fist
   Check of a condition and replacement of stupichny assembly
   Removal and installation of a forward stretcher
   Removal, regenerative repair and installation of a rack of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross-section stability
   Removal, regenerative repair and installation of the bottom lever of a forward suspension bracket
   Replacement of the bottom spherical support
   Removal and installation of back stupichny assembly
   Check of a condition and replacement of bearings of back wheels
   Removal, check of a condition and installation of the back shock-absorber
   Removal and installation of screw springs of a back suspension bracket
   Removal and installation of a torsionny beam of a back suspension bracket
   Replacement of rezinometallichesky hinges of longitudinal levers of a torsionny beam
   System of adjustment of a road gleam of a back axis - the general information and adjustment
   Removal and installation of the air valve and highway of a regulator of a road gleam of a back axis (Versatile person model)
   Removal and installation of a steering wheel
   Removal and installation of a steering column
   Removal, check of a condition and installation of an intermediate shaft of a steering column
   Replacement of protective covers of a case of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Air removal from a hydraulic path of GUR
   Removal and installation of tips of steering drafts
   Removal and installation of steering draft
   Corners of installation of wheels
+ Body
+ Onboard electric equipment




Removal and installation of the air valve and highway of a regulator of a road gleam of a back axis (Versatile person model)

 PERFORMANCE ORDER

  1. Open a back door, develop clip-on earrings of clamps on 90 ° and open a cover of the right back combined lamp. Remove a protective cover and pit pressure in system, by a nazhimaniye on the central button of the valve.
  2. Give a fixing nut and remove the valve from a basic arm, then cramp together lock uvulas and disconnect an air route.
  3. Release the socket and disconnect the valve highway from laid under the bottom of the car of the right highway.
  4. Release sockets and disconnect the right and left highways from the three-running union. Liberate highways from intermediate clamps on the bottom and remove them from the car.
  5. Installation is made upside-down. In summary pump up system the pump and check on existence of signs of development of leakages of air.