Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of a rotary fist
   Check of a condition and replacement of stupichny assembly
   Removal and installation of a forward stretcher
   Removal, regenerative repair and installation of a rack of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross-section stability
   Removal, regenerative repair and installation of the bottom lever of a forward suspension bracket
   Replacement of the bottom spherical support
   Removal and installation of back stupichny assembly
   Check of a condition and replacement of bearings of back wheels
   Removal, check of a condition and installation of the back shock-absorber
   Removal and installation of screw springs of a back suspension bracket
   Removal and installation of a torsionny beam of a back suspension bracket
   Replacement of rezinometallichesky hinges of longitudinal levers of a torsionny beam
   System of adjustment of a road gleam of a back axis - the general information and adjustment
   Removal and installation of the air valve and highway of a regulator of a road gleam of a back axis (Versatile person model)
   Removal and installation of a steering wheel
   Removal and installation of a steering column
   Removal, check of a condition and installation of an intermediate shaft of a steering column
   Replacement of protective covers of a case of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Air removal from a hydraulic path of GUR
   Removal and installation of tips of steering drafts
   Removal and installation of steering draft
   Corners of installation of wheels
+ Body
+ Onboard electric equipment




Replacement of the bottom spherical support

At manufacturer spherical support приклепываются to the lever. For fastening of replaceable support bolts are used.


 PERFORMANCE ORDER

  1. Remove the bottom lever of a suspension bracket (see. Removal, regenerative repair and installation of the bottom lever of a forward suspension bracket).

If the established spherical support привернута bolts, need for removal of the lever disappears, - it is rather simple to liberate a support finger from a collar on a rotary fist.

  1. Clamp the bottom lever in a vice with soft sponges and drill rivets of fastening of a support a drill in diameter of 12 mm.
  1. Remove the remains of rivets and remove a support.
  2. Clear a lever surface of traces of development of corrosion and grease it with the rust converter.
  3. The replaceable support fastens to the lever three bolts with nuts and spring washers, - the demanded fixture always can be got in firm shops of automobile accessories.
  4. At installation of fixture track, that nuts settled down from below. Tighten nuts with demanded effort.
  5. Establish the lever on the regular place (see. Removal, regenerative repair and installation of the bottom lever of a forward suspension bracket).