Opel Astra, Zafira

since 1998 of release

Repair and car operation



Opel Astra
+ Opel Astra and Zafira Cars
+ Operation manual
+ Routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of a rotary fist
   Check of a condition and replacement of stupichny assembly
   Removal and installation of a forward stretcher
   Removal, regenerative repair and installation of a rack of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross-section stability
   Removal, regenerative repair and installation of the bottom lever of a forward suspension bracket
   Replacement of the bottom spherical support
   Removal and installation of back stupichny assembly
   Check of a condition and replacement of bearings of back wheels
   Removal, check of a condition and installation of the back shock-absorber
   Removal and installation of screw springs of a back suspension bracket
   Removal and installation of a torsionny beam of a back suspension bracket
   Replacement of rezinometallichesky hinges of longitudinal levers of a torsionny beam
   System of adjustment of a road gleam of a back axis - the general information and adjustment
   Removal and installation of the air valve and highway of a regulator of a road gleam of a back axis (Versatile person model)
   Removal and installation of a steering wheel
   Removal and installation of a steering column
   Removal, check of a condition and installation of an intermediate shaft of a steering column
   Replacement of protective covers of a case of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Air removal from a hydraulic path of GUR
   Removal and installation of tips of steering drafts
   Removal and installation of steering draft
   Corners of installation of wheels
+ Body
+ Onboard electric equipment

http://flashlottos24.ru/


Removal and installation of tips of steering drafts

Removal

The special stripper is required.


 PERFORMANCE ORDER

  1. Cock the parking brake, поддомкратьте a front of the car and establish it on props and remove the corresponding forward wheel.
  2. 2 Weaken a tip lock-nut on a bar of steering draft and unscrew it on a turn quarter, holding a tip for лыски a rozhkovy key, - in case of need previously a wire brush smooth out a carving and grease it with structure «Liquid key». For a guarantee of preservation of corners of a convergence of wheels at assembly count quantity of free rounds of a carving on draft.
  1. In case of need take шплинт and give a nut of fastening (1) spherical finger to the lever of a rotary fist.
  1. By means of a stripper (3) liberate a sharovy finger of a tip from a rotary fist, - try not to damage a boot.
  1. Counting rounds and without shifting a lock-nut, unscrew a steering tip from draft.

The right and left tips differ from each other on a design, - right is marked with a letter of R and has the right carving, left is marked with a letter of L and has the left carving.

Installation

 PERFORMANCE ORDER

  1. Screw a steering tip on draft on the quantity of rounds counted in the course of dismantle.
  2. Fill a sharovy finger in the lever on a rotary fist and tighten a fixing nut with demanded effort, - if the finger is turned, press it in a konusny opening of the lever, in case of need establish new шплинт.
  3. Holding a tip from a provorachivaniye a key for лыски, tighten a lock-nut, whenever possible with demanded effort, - use a dinamometrichesky key and a transitional nozzle such as «carrion crows a paw».
  4. Establish a wheel, lower the car on the earth and tighten wheel bolts with demanded effort.
  5. At the first possibility drive away the car on specialized car repair shop for check and adjustment of corners of installation of forward wheels.